Before installing AsteroidOS to your watch, make sure you are aware of the capabilities and limitations of AsteroidOS on the MTK6580 Watches. The following table should summarize the current support of this watch:
This port of AsteroidOS should cover the following watches:
- Diggro DI06
- Older Diggro DI07
- Lemfo LES1
For other MTK6580 watches, check out harmony instead
You can report any hardware support issue here.
1. Connect your watch
Plug the USB cable of your watch to your computer, with the current operating system running.
2. Setup SPFlashTool
In SPFlashTool, select the Download
tab, under Scatter-loading File
choose the MT6580_AsteroidOS_scatter-inharmony.txt
file you just downloaded.
Make sure you have a screen looking like the image below and then press Download
3. Turn your watch off
Long press the power button until the watch turns off. As soon as the watch is off, it should be detected by SPFlashTool which will then initiate the flashing sequence. This step might take a while.
4. Turn your watch on
Once the flashing is over, long press the power button until the watch boots to AsteroidOS.
5. Enjoy your new OS!